MOBILE SITE | Company | Consumer Support | Dealer Support | Apply for Dealer
Cabinet Island- Base Cabinets - 44" ADA Compliant Combo Sink Base Cabinet
  • ADA Compliant Sink Cabinet
base cabinet
stainless steel base cabinets stainless steel base cabinets stainless steel base cabinets stainless steel base cabinets stainless steel base cabinets
stainless steel base cabinets stainless steel base cabinets stainless steel base cabinets  

44" ADA Compliant Combo Sink Base Cabinet

44"W x 28-1/4"D x 32"H (w/Legs)
Download Spec.Sheet for ADA44BC
85.2 LBS (Product Weight)
47 x 34" x 32" / 107 LBS (Pakcage Size and Weight)
Download Cabinet Island Setup Manual

The Sunstone 44 Inch Sink Base Cabinet is fully convertible for multiple applications, and with multiple levels of ADA Compliancy from Partial to Full. The Cabinet is Wheelchair Accessible and comes with all Lowered 2” Height Peg Legs and Flush Kick Plates making a total approximate height of just 33” Inches with Counter installed, still below the industry requirement of 34” . The Center Front Panel can be Placed either in the Forward or Back Positions, and when placed in the back position there are two Pull-Handles on the inner left and right sides which helps the individual pull their wheelchair in closer into the cabinet space for full access meeting the required ADA counter depths. in addition the center panel can be Lifted so the top edge meets the lower lip of the Sink as shown with our ADA Compliant 37 Inch Double Sink. The cabinet can similarly be used as a Prep-Zone simply by either not installing the Sink, or by leaving the Center Panel in the forward Position. The inside angled panel can be easily removed for easy access to all inside Plumbing or Electrical with Access Panels available 1-Gange Internal Electrical Box.  

All Sunstone Cabinet Island Series Cabinets are easily installed with simple Pin-Locks, simply Lift and Drop each cabinet into each other, no tools are required for much of the installation process and most cabinet configurations can be setup in less than an hour. For Full-Bullnose Counters – Simply remove each of the cabinets Counter-Rail seen as the top Horizontal Column, and overlap counter over front edge making for some elegant added features. The Cabinet comes completely setup, only fasten on each Door or Drawer Handle, Hand-Screw each Adjustable Leg in place, and Snap on the Front & Back Kick-Plates

  • Lifetime Structure Warranty   • 304 Stainless Steel Structure
  • Adjustable Center Panel   • Front & Back Kick-Plates
  • Removable Counter Rail   • Easy Pin-Lock Installation
  • Optional Wheel Casters   • Covered Side Wall Access Ports
  • Replaceable Face Panel   • (4) Adjustable Peg-Leg
  • Floor Utility Access   • Available 1-Gange Box
Separately purchase the Side Cabinet End Panel & End Kick-Plate Item No. SCC25KP, & SCC27EP

@2019 Sunstone Metal Products LLC, All Right Reserved.